PowMr 40A Solar Charge Controller 12V 24V Intelligent, Solar Panel Battery Regulator Charge Controller Switch Dual USB LCD Display (40A)
PowMr 40A Solar Charge Controller 12V 24V Intelligent, Solar Panel Battery Regulator Charge Controller Switch Dual USB LCD Display (40A) by PowMr at Solar Kit 2010. MPN: CM20K-40A. Hurry! Limited time offer. Offer valid only while supplies last. Warranty：you will get 24 months warranty from PowMr.Warm tips:Be sure to leave 5.9 inches above and below the controller when install the
☀Suitable for farm solar power system, solar street light, solar patio light, solar billboards, outdoor camping solar system, ship solar system.☀
Mutiple electric protection
●inverse connection protection
●over-current and short-circuit protection
●low voltage and overcharge protection
●Over temperature protection
●Dual mosfet Reverse current protection
●low heat production
1.Make sure your battery has enough voltage for the controller to recognize the battery type before first installation.
2.The battery cable should be as short as possible to minimize loss.
3.The regulator is only suitable for lead acid batteries: OPEN,AGM, GEL
it is not suited for nickel metal hydride, lithium ions or other batteries.
4.The charge regulator is only suitable for regulating solar modules. Never connect another charging source to the charge regulator.
SYSTEM CONNECTION: 1.Connect the battery to the charge regulator - plus and minus.
2.Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus.
The reverse order applies when deinstalling!
An improper sequence order can damage the controller!
Batt voltage: 12V/24V auto
Charge current: 40A
Discharge current: 40A
Max Solar input: <50V
Float charge: 13.7V(defaul,adjustable)
Discharge stop: 10.7V(defaul,adjustable)
Discharge reconnect: 12.6V(defaul,adjustable)
USB output: 5V/3A
Operating temperature: -35~+60 ℃
Size/Weight: 5.5 x 3 x 1.6 inches /0.66lb
*all blod fonts voltage X2 ,X4 while using 12V /24V system.
Features & Highlights
- ❶PowMr 40amp 12V/24V high 3-stage PWM charge management(Boost,equalization,floating).Dual USB output 5V max 2.5A Reverse current protection,Low heat production.Power off memory function.
- ❷Equipped with industrial-grade STM 8 microprocessor to make sure reliable charge and discharge period management.
- ❸LCD display adjustable Low voltage discharge,Floating voltage,Low voltage recharge,Load mode of PV/Battry/Load
- ❹Fit for Gel,Agm,Sealed battery. ●3 adjustable load modes:light mode,light+timer mode,manual mode.
- ❺24 months warranty.Package comes with a well written user manual in English.easy to install and use.
|Item Size:||4.21 x 2.01 x 2.01 inches|
|Package Weight:||0.8 pounds|
|Package Size:||3.8 x 2 x 2 inches|