PowMr 80A Solar Charge Controller 24V 1920W 12V 960W Solar Panel Charging Discharge Regulator with Dual USB 2400mA Output with Load Timer and Light Control Heat Sink[Not MPPT]
Super Savings Item! Free Shipping Included! Save 34% on the PowMr 80A Solar Charge Controller 24V 1920W 12V 960W Solar Panel Charging Discharge Regulator with Dual USB 2400mA Output with Load Timer and Light Control Heat Sink[Not MPPT] by PowMr at Solar Kit 2010. MPN: X80. Hurry! Limited time offer. Offer valid only while supplies last. Warming tips:The solar panels' voltage is the two time of batteries' voltage is better. than stay out 5.9in space up and down of controller when you
❶controller host work independently: work parameters for factory settings (original parameters), if you need to change the parameters, you need to connect the control panel (display board)
❷control board (display board), can be separated work, but can not work independently, the need to connect the host computer network controller, read the model, you can work normally.
❸The green and yellow lights indicator that PV and Battery working statues.
❹ control board (display board) separation work, transmission speed:line's Standard configuration 78.8ft, 9600bit, the maximum support distance of 1000 meters
Maximum power current:80A
●Dual USB:5V 2400mA
●Battery float voltage:13.8V(12V system) / 27.6V(24V system)
●Battery (under voltage) protection:10.6V(12V system) / 21.2V(24V system)
●Battery (under voltage) recovery voltage；12.6V(12V system) / 25.2V(24V system)
●System load loss:≤13MALoop Buck:≤100mV
●Humidity requirements:≤90%,no condensation
●Maximum open circuit voltage of the solar panel:18-24V(12V system) / 36-48V(24V system)
●Solar panels maximum open circuit voltage (V):≤48V
●Peak power of solar cell panel (MAX WP)≤1000W
●Battery capacity configuration≥800AH
1pcs 80A Solar Controller X80
1pcs Temperature Sensor
1pcs English User Manual
Features & Highlights
- ❶This 80 amp solar charge controlelr Latest Removable remote control,standard line 78.74in,longest 39370.07in(customized).High efficient PWM charging.mian PWM.power saving.
- ❷Large LCD Screen and LED display PV and Battery working status,Simple.The green and yellow LEDs on the controller cable interface: When the green LED is on, the system working normally, while the green LED flashes, indicating that the load is working. As the yellow LED is on, indicating that the solar panel is connected and the yellow light flashes to indicate that it is being charged.Like the second picture.
- ❸Load mode:light mode,light+timer mode,manual mode,Dual timer mode.
- ❹Battery reverse discharge protection;Battery reverse polarity protection. Overload,short-circuit protection
- ❺One years warranty.A key to open and close the load. A key to restore the factory setting.
|Item Weight:||1.98 pounds|